Skip to content Skip to footer
Description:

The Holmes’ 5 bedroom architecturally designed home is situated on a one of a kind plot of Kanuka cladden goodness overlooking Lake Wanaka. The contemporary architecture resonates with the surrounding natural landscape by design and use of materials.

Nathan a builder and Sarah an Artist, want to utilise their respective talents within this bathroom. Nathan will undertake all construction and fit-out of the bathroom apart from plumbing, electrical and tiling. He wants the design to incorporate as much as possible to use his skills and keep the budget down.

Sarah want’s the bathroom to be something different, cave like with sophistication. The Wieliczka Salt Mine Chapel Cave in Poland is the theme for the bathroom with an added twist of clean lined modernism. The chapel being underground within the salt mine; the walls and floor are the natural stone finish of the cave, it features a grand stone staircase and a huge crystal chandelier. Given the intense natural surroundings of the home, the Holmes’ want the natural materials surrounding them bought within this hollow.

The space itself is limited for a master ensuite of a house of such grandeur. A double walk in shower is a must, as is a bath. Subtle lighting is critical to ensure a relaxing soak in the bath whilst looking out at the vast mountains and lake during the early evening sunset. The budget is limited for the caliber of the build, therefore extending this with clever material choice and design features is paramount.
The deciding factors behind the material choice were: Colour, texture (Smooth) and the fact that the Corian has a ‘soft’ aesthetic against the raw rough, natural stone that was used elsewhere in the bathroom.

Colour(s) used:
Application-icon
Applications:

Bathroom

Design-icon
Designed By:

Hannah Withy (Hannah Martin Design)

Fabricator-icon
Fabricator:

Central Benchmakers

Camera-icon
Photographer:

Rachael McKenna

FENIX innovative materials

All FENIX innovative materials for interior design are independently certified as Carbon Neutral.

APT is committed to planting – and protecting – one native tree in New Zealand for every FENIX sheet, panel and sink sold. In addition, a native tree will be planted for every product delivery.

Read more about APT’s environmental initiatives here >

Fenix NTM Bloom Colours

SHEET OPTIONS

0.7mm FENIX NTM Bloom sheets are available in two sizes: 3050x1300mm and 4200x1300mm.
Please note: FENIX NTM is directional. Grain direction is indicated by the arrows on the protective film. 

PRESSED PANELS MADE WITH FENIX NTM BLOOM

All New Zealand stocked FENIX ranges and colours can be supplied as a ‘pressed panel’ for vertical and horizontal applications.

Read more about Pressed Panels made with FENIX >

EDGING OPTIONS

Colour matched ABS edging is available in Laser or Standard PU ABS. All edging is available in 23mm and 43mm widths x 1mm thickness.

All FENIX innovative materials for interior design are independently certified as Carbon Neutral.

APT is committed to planting – and protecting – one native tree in New Zealand for every FENIX sheet, panel and sink sold. In addition, a native tree will be planted for every product delivery.

Read more about APT’s environmental initiatives here >

PRESSED PANELS made with FENIX

MDF

FENIX can be pressed on either 18mm MDF (Moisture-Resistant E0), 25mm or 30mm MDF (E0) resulting in an almost 20mm, 27mm or 32mm finished panel thickness. The sheet size is 3.045m x 1.220m.

BIRCH PLYWOOD

FENIX can be pressed on either 18mm or 24mm birch plywood resulting in an almost 20mm or 26mm finished panel thickness. The sheet size is 2.435m x 1.215m.

FENIX Pressed Panels are available in two options*:

  • Face Two Sides (F2S) is where FENIX is pressed onto both faces (or sides) of the substrate for a more premium option.
  • One Face One Back (1F1B) is where FENIX is pressed onto one face (or side) of the substrate, with a similarly coloured ARPA HPL (high-pressure laminate) pressed onto the back face, providing a lower cost option. (FENIX NTM Bloom is currently available in F2S only)

PANEL EDGING OPTIONS

  • Colour-matched Laser ABS edging*, and Standard ABS PU edging are available for the FENIX NTM and FENIX NTM Bloom ranges. The FENIX NTA range is only available in a Standard PU ABS edging only (not laser).
  • Laser ABS edging is available* in colour-matched 23mm and 43mm widths x 1mm thickness
  • Standard ABS PU edging unglued available in colour-matched 23mm and 43mm widths x 1mm thickness
  • FENIX Colour Core edging* in 1.2mm thickness

DARK COLOUR DESIGN CONSIDERATION

Putting dark colour benchtops and cabinetry panels into direct sunlight applications can affect the substrate performance in terms of product movement.