Skip to content Skip to footer
Description:

A new build arrived in our design service at exactly the right moment. We were able to explore our spatial findings and open up what was a small tight kitchen with a closed-off scullery into this magnificent design that it became. A mix of materials and elements created a strong statement piece.

The kitchen island in Corian Grey Onyx provides a sculptural centerpiece for the kitchen, dining and living spaces. We wanted to anchor this open plan space with a dark and dense back area where the sexy softness of the island is offset by the deep black. The thickness of the island top on the working side is 50mm all the way along. On the living side, it starts at 600mm and changes to 50mm as it cantilevers off the solid column creating a social zone.

Fenix Oro Cortez was used throughout the kitchen to highlight the strong contemporary lines of this project. The soft champagne metallic was the only material and colour that we wanted to consider for this. It reflects the play of light without overpowering. This is most obvious behind the buffet mesh cabinet. When the doors open up you get the ‘Ohh La La’ moment of the elegant glow of the Fenix Oro Cortez.

The Corian Grey Onyx (which was an indent colour) was chosen for the soft and continuous veining which could be seamlessly matched through the complicated angular detail of the island top.
Corian Deep Nocturne enabled an intense and seamless black backdrop.

Colour(s) used:
Application-icon
Applications:

Kitchen Benchtop

Design-icon
Designed By:

Melanie Craig

Fabricator-icon
Fabricator:

Central Benchmakers

Camera-icon
Photographer:

Jamie Cobel

FENIX innovative materials

All FENIX innovative materials for interior design are independently certified as Carbon Neutral.

APT is committed to planting – and protecting – one native tree in New Zealand for every FENIX sheet, panel and sink sold. In addition, a native tree will be planted for every product delivery.

Read more about APT’s environmental initiatives here >

Fenix NTM Bloom Colours

SHEET OPTIONS

0.7mm FENIX NTM Bloom sheets are available in two sizes: 3050x1300mm and 4200x1300mm.
Please note: FENIX NTM is directional. Grain direction is indicated by the arrows on the protective film. 

PRESSED PANELS MADE WITH FENIX NTM BLOOM

All New Zealand stocked FENIX ranges and colours can be supplied as a ‘pressed panel’ for vertical and horizontal applications.

Read more about Pressed Panels made with FENIX >

EDGING OPTIONS

Colour matched ABS edging is available in Laser or Standard PU ABS. All edging is available in 23mm and 43mm widths x 1mm thickness.

All FENIX innovative materials for interior design are independently certified as Carbon Neutral.

APT is committed to planting – and protecting – one native tree in New Zealand for every FENIX sheet, panel and sink sold. In addition, a native tree will be planted for every product delivery.

Read more about APT’s environmental initiatives here >

PRESSED PANELS made with FENIX

MDF

FENIX can be pressed on either 18mm MDF (Moisture-Resistant E0), 25mm or 30mm MDF (E0) resulting in an almost 20mm, 27mm or 32mm finished panel thickness. The sheet size is 3.045m x 1.220m.

BIRCH PLYWOOD

FENIX can be pressed on either 18mm or 24mm birch plywood resulting in an almost 20mm or 26mm finished panel thickness. The sheet size is 2.435m x 1.215m.

FENIX Pressed Panels are available in two options*:

  • Face Two Sides (F2S) is where FENIX is pressed onto both faces (or sides) of the substrate for a more premium option.
  • One Face One Back (1F1B) is where FENIX is pressed onto one face (or side) of the substrate, with a similarly coloured ARPA HPL (high-pressure laminate) pressed onto the back face, providing a lower cost option. (FENIX NTM Bloom is currently available in F2S only)

PANEL EDGING OPTIONS

  • Colour-matched Laser ABS edging*, and Standard ABS PU edging are available for the FENIX NTM and FENIX NTM Bloom ranges. The FENIX NTA range is only available in a Standard PU ABS edging only (not laser).
  • Laser ABS edging is available* in colour-matched 23mm and 43mm widths x 1mm thickness
  • Standard ABS PU edging unglued available in colour-matched 23mm and 43mm widths x 1mm thickness
  • FENIX Colour Core edging* in 1.2mm thickness

DARK COLOUR DESIGN CONSIDERATION

Putting dark colour benchtops and cabinetry panels into direct sunlight applications can affect the substrate performance in terms of product movement.