Skip to content Skip to footer

APT - Architectural Products and Technologies

APT - Architectural Products and Technologies
Close
High Performance Materials

FENIX NTM® & NTM® Bloom

FENIX NTM, introduced in 2013, is a technical and aesthetic answer to two key interior design trends: smart materials and matt surfaces. The application of nanotechnology enables intensely coloured matt surfaces to be delivered while making them highly resistant to fingerprints and scratches.

FENIX NTM Bloom uses Lignin Core Technology, which replaces 50% of the traditionally used petroleum-based phenol with lignin, a bio-based natural adhesive found in plants. This means that FENIX NTM Bloom is an even more environmentally friendly choice without any performance or aesthetic compromise.

PRESSED PANELS MADE WITH FENIX NTM

All New Zealand stocked FENIX ranges and colours can be supplied as a ‘pressed panel’ for vertical and horizontal applications. Read more about Pressed Panels made with FENIX >

NTM® & NTM® Bloom Ranges

Beige Luxor 0719

Rosso Namib 0789

Verde Kitami 0794

Bianco Kos 0032

Bianco Kos 0032

Bianco Malè 0029

Bianco Malè 0029

Blu Fes 0754

Blu Fes 0754

Cacao Orinoco 0749

Cacao Orinoco 0749

Castoro Ottawa 0717

Castoro Ottawa 0717

Castoro Ottawa 0717

Castoro Ottawa 0717

Grigio Antrim 0752

Grigio Antrim 0752

Grigio Bromo 0724

Grigio Bromo 0724

Grigio Efeso 0725

Grigio Efeso 0725

Grigio Londra 0718

Grigio Londra 0718

Nero Ingo 0720

Nero Ingo 0720

Rosso Jaipur 0751

Rosso Jaipur 0751

Titanio Doha 2638

Titanio Doha 2638

Verde Comodoro 0750

Verde Commodoro 0750

Azzurro Naxos 0771

Azzurro Naxos 0771

Giallo Kashmir 0772

Giallo Kashmir 0772

Rosso Askja 0770

Rosso Askja 0770

Verde Brac 0773

Verde Brac 0773

FENIX innovative materials

All FENIX innovative materials for interior design are independently certified as Carbon Neutral.

APT is committed to planting – and protecting – one native tree in New Zealand for every FENIX sheet, panel and sink sold. In addition, a native tree will be planted for every product delivery.

Read more about APT’s environmental initiatives here >

Fenix NTM Bloom Colours

SHEET OPTIONS

0.7mm FENIX NTM Bloom sheets are available in two sizes: 3050x1300mm and 4200x1300mm.
Please note: FENIX NTM is directional. Grain direction is indicated by the arrows on the protective film. 

PRESSED PANELS MADE WITH FENIX NTM BLOOM

All New Zealand stocked FENIX ranges and colours can be supplied as a ‘pressed panel’ for vertical and horizontal applications.

Read more about Pressed Panels made with FENIX >

EDGING OPTIONS

Colour matched ABS edging is available in Laser or Standard PU ABS. All edging is available in 23mm and 43mm widths x 1mm thickness.

All FENIX innovative materials for interior design are independently certified as Carbon Neutral.

APT is committed to planting – and protecting – one native tree in New Zealand for every FENIX sheet, panel and sink sold. In addition, a native tree will be planted for every product delivery.

Read more about APT’s environmental initiatives here >

PRESSED PANELS made with FENIX

MDF

FENIX can be pressed on either 18mm MDF (Moisture-Resistant E0), 25mm or 30mm MDF (E0) resulting in an almost 20mm, 27mm or 32mm finished panel thickness. The sheet size is 3.045m x 1.220m.

BIRCH PLYWOOD

FENIX can be pressed on either 18mm or 24mm birch plywood resulting in an almost 20mm or 26mm finished panel thickness. The sheet size is 2.435m x 1.215m.

FENIX Pressed Panels are available in two options*:

  • Face Two Sides (F2S) is where FENIX is pressed onto both faces (or sides) of the substrate for a more premium option.
  • One Face One Back (1F1B) is where FENIX is pressed onto one face (or side) of the substrate, with a similarly coloured ARPA HPL (high-pressure laminate) pressed onto the back face, providing a lower cost option. (FENIX NTM Bloom is currently available in F2S only)

PANEL EDGING OPTIONS

  • Colour-matched Laser ABS edging*, and Standard ABS PU edging are available for the FENIX NTM and FENIX NTM Bloom ranges. The FENIX NTA range is only available in a Standard PU ABS edging only (not laser).
  • Laser ABS edging is available* in colour-matched 23mm and 43mm widths x 1mm thickness
  • Standard ABS PU edging unglued available in colour-matched 23mm and 43mm widths x 1mm thickness
  • FENIX Colour Core edging* in 1.2mm thickness

DARK COLOUR DESIGN CONSIDERATION

Putting dark colour benchtops and cabinetry panels into direct sunlight applications can affect the substrate performance in terms of product movement.